Field Pullout Testing and Performance Evaluation of GFRP Soil Nails


Hong-Hu Zhu 1, Jian-Hua Yin, M. ASCE 2; Albert T. Yeung, F. ASCE 3; and Wei Jin 4
1 School of Earth Sciences and Engineering, Nanjing University; formerly,  Department of Civil and Structural Engineering, The Hong Kong Polytechnic University
2 Department of Civil and Structural Engineering, The Hong Kong Polytechnic University
3 Department of Civil Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong
4 Department of Electrical Engineering, The Hong Kong Polytechnic University
Journal of Geotechnical and Geoenvironmental Engineering, 2010.
Submitted 24 June 2009; accepted 6 October 2010; posted ahead of print 8 October 2010


ABSTRACT: Glass fiber reinforced polymer (GFRP) materials provides practical solutions to corrosion and site maneuvering problems for civil infrastructures using conventional steel bars as reinforcements. In this study, the feasibility of using GFRP soil nails for slope stabilization is evaluated. The GFRP soil nail system consists of a GFRP pipe installed by the double grouting technique. Two field-scale pullout tests were performed at a slope site. Fiber Bragg grating (FBG) sensors, strain gauges, linear variable displacement transformers (LVDTs), and a load cell were used to measure axial strain distributions and pullout force-displacement relationships during testing. The pullout test results of steel soil nails at another slope site are also presented for comparison. It is proven that the load transfer mechanisms of GFRP and steel soil nails have certain difference. Based on these test results, a simplified model using a hyperbolic shear stress-strain relationship was developed to describe the pullout performance of the GFRP soil nail. A parametric study was conducted using this model to study some factors affecting the pullout behavior of GFRP soil nails, including nail diameter, shear resistance of soil-grout interface, and ratio of interface shear coefficient to the Young's modulus of the nail. The results indicate that the GFRP soil nail may exhibit excessive pullout displacement and thus a lower allowable pullout resistance in comparison with the steel soil nail.

KEYWORDS: soil nail, glass fiber reinforced polymer (GFRP), pullout test, fiber Bragg grating (FBG)

[1] Adimi, R., and Benmokrane, B. (1997). "Fatigue behaviour of GFRP bars embedded in concrete." Proc., Annual Conf. Can. Soc. Civil Engrg., Montréal, Canadian Society of Civil Engineering, 121-130.
[2] Al-Salloum, Y.A., and Almusallam, T.H. (2007). "Creep effect on the behavior of concrete beams reinforced with GFRP bars subjected to different environments." Constru. Build. Mat., 21(7), 1510-1519
[3] American Concrete Institute (ACI) Committee 440. (1996). State-of-the art report on fiber-reinforced plastic (FRP) reinforcement for concrete structures. ACI Rep. 440R-96, Detroit, MI.
[4] American Concrete Institute (ACI) Committee 440. (2001). Guide for the design and construction of concrete reinforced with FRP bars. ACI Rep. 440.1 R-01, ACI, Farmington Hills, MI.
[5] American Concrete Institute (ACI) Committee 440. (2004). Prestressing concrete structures with FRP tendons. ACI, Farmington Hills, MI.
[6] Ashford, S.A., and Jakrapiyanun, W. (2001). "Drivability of glass FRP composite piling." J. Compos. Constr., ASCE, 5(1), 58–60.
[7] Bakis, C.E., Nanni, A., Terosky, J.A., and Koehler, S.W. (2001). "Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete application." Compos. Sci. Technol., 61(6), 815-823.
[8] Bank, L.C. (1989). "Shear properties of pultruded Glass FRP materials."  J. Mat. Civ. Engrg., ASCE, 2(2), 118-122.
[9] Beekman, A., Mallner, A.J., and Sutterer, K. (2007). "Fiberglass nail pullout capacity for rapid soil landslide remediation." Proc., Transportation Research Board 86th Annual Meeting, Washington, D.C., Paper No: 01042056.
[10] Benmokrane, B., Xu, H., and Bellavance, E. (1996). "Bond strength of cement grouted glass fibre reinforced plastic (GFRP) anchor bolts." Int. J. Rock Mech. Min. Sci. Geomech., 33(5), 455-465.
[11] Budelmann, H., and Rostàsy, F.S. (1993). "Creep rupture behavior of FRP elements for prestressed concrete: Phenomenon, results, and forecast models." Fiber-reinforced plastic reinforcement for concrete structures. A. Nanni, and C.W. Dolan, eds., American Concrete Institute, Farmington Hills, MI, 87-99.
[12] Cheng, Y.M., Choi, Y.-K., Yeung, A.T., Tham, L.G., Au, A.S.K., Wei, W.B., and Chen, J. (2009). "New soil nail material-pilot study of grouted GFRP pipe nails in Korea and Hong Kong."  J. Mat. Civ. Engrg., ASCE, 21(3), 93-102.
[13] Chu, L.-M., and Yin, J.-H. (2005). "Comparison of interface shear strength of soil nails measured by both direct shear box tests and pullout tests." J. Geotech. Geoenviron. Engrg., ASCE, 131(9), 1097-1107.
[14] Choi, Y.K., Woo, S.B., Kwon, O.Y., Park, J.H., and Han, H.H. (2003). "Shear strength characteristics and behaviour of ground grouted using FRP reinforcing members." Proc., 12th Asian Regional Conf. Soil Mech. Geotech. Engrg., Singapore, World Scientific Publishing, 461-464.
[15] Dutta, P.K., and Hui, D. (2000). "Creep rupture of a GFRP composite at elevated temperatures." Comp. Struct., 76(1-3), 153-161.
[16] Ellyin, F., and Kujawski, D. (1992). "Fatigue testing and life predictions of fibre glass reinforced composites." Advanced composite materials in bridges and structures. K.W. Neale, and P. Labossiere, eds., Canadian Society of Civil Engineering, Montreal, 111-118.
[17] Frank, A., Nellen, P.M., Brönnimann, R., and Sennhauser, U. (1999). "Fiber optical Bragg grating sensors embedded in GFRP rockbolts." Proc., SPIE, Conference on Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, Newport Beach, CA, 3670, 263-270.
[18] Frost, J.D., and Han, J. (1999). "Behavior of interfaces between fiber-reinforced polymers and sands." J. Geotech. Geoenviron. Engrg., ASCE, 125(8), 633-640.
[19] Geotechnical Engineering Office (GEO). (2005). Good practice in design of steel soil nails for soil cut slopes. GEO Technical Guidance Note No. 23, Civil Engineering and Development Dept., Government of Hong Kong Special Administrative Region, Hong Kong.
[20] Geotechnical Engineering Office (GEO). (2008). Guide to soil nail design and construction. Geoguide 7, Civil Engineering and Development Dept., Government of Hong Kong Special Administrative Region, Hong Kong.
[21] Gomez, J.E., Filz, G.M., and Ebeling, R.M. (2003). "Extended hyperbolic model for sand-to-concrete interfaces." J. Geotech. Geoenviron. Engrg., ASCE, 129(11), 993-1000.
[22] Harper, J.S., Smart, B.G.D., and Sommerville, J.M. (1995). "Recent applications of soil nails and cables in the UK." Proc., International Symposium on Anchors in Theory and Practice, Salzburg, R. Widmann, eds., Balkema, 163-172.
[23] Hirayama, H. (1990). "Load-settlement analysis for bored piles using hyperbolic transfer functions."  Soils Found., 30(1), 55-64.
[24] Hong, Y.-S., Wu, C.-S., and Yang, S.-H. (2003). "Pullout resistance of single and double nails in a model sandbox." Can. Geotech. J., 40(5), 1039-1047.
[25] Iskander, M., and Hassan, M. (1998). "State of the practice review: FRP composite piling." J. Compos. Constr., ASCE, 2(3), 116-120.
[26] Jiang, G., Dawood, M., Peters, K., and Rizkalla, S. (2008). "Self-monitoring fiber reinforced polymer strengthening system for civil engineering infrastructures." Proc., SPIE, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2008, San Diego, CA, 693406-1.
[27] Junaideen, S.M., Tham, L.G., Law, K.T., Lee, C.F., and Yue, Z.Q. (2004). "Laboratory study of soil-nail interaction in loose, completely decomposed granite." Can. Geotech. J., 41(2), 274-286.
[28] Kalamkarov, A.L., Fitzgerald, S.B., MacDonald, D.O., and Georgiades, A.V. (1999). "On the processing and evaluation of pultruded smart composites." Composites Part B, 30(7), 753-763.
[29] Kalamkarov, A.L., Georgiades, A.V., MacDonald, D.O., and Fitzgerald, S.B. (2000a). "Pultruded fiber reinforced polymer reinforcements with embedded fiber optic sensors." Can. J. Civ. Engrg., 27(5), 972-984.
[30] Kalamkarov, A.L., MacDonald, D.O., Fitzgerald, S.B., and Georgiades, A.V. (2000b). "Reliability assessment of pultruded FRP reinforcements with embedded fiber optic sensors." Comp. Struct., 50(1), 69-78.
[31] Kalamkarov, A., Saha, G., Rokkam S., Newhook J., and Georgiades, A. (2005). "Strain and deformation monitoring in infrastructure using embedded smart FRP reinforcements." Composites Part B, 36(5), 455-467.
[32] Kim, S.H., Hwang, Y.C., Kim, N.Y., and Choi, Y.K. (2001). "Reinforcing method of rock slope using FRP pipe." Proc., International Conference on Landslides-Causes, Impacts and Countermeasures, Davos, 535-543.
[33] Kondner, R.L. (1963). "Hyperbolic stress-strain response: cohesive soil."  J. Soil Mech. Found. Div., ASCE, 89(1), 115-143.
[34] Lau, K.T., Yuan, L., Zhou, L.M., Wu, J., and Woo, C.H. (2001). "Strain monitoring in FRP laminates and concrete beams using FBG sensors." Comp. Struct., 51(1), 9-20.
[35] Luo, S.Q., Tan, S.A., and Yong, K.Y. (2000). "Pull-out resistance mechanism of a soil nail reinforcement in dilative soils." Soils Found., 4(1), 47-56.
[36] Milligan, G.W.E., and Tei, K. (1998). "The pull-out resistance of model soil nails." Soils Found., 38(2), 179-190.
[37] Miyata, K. (1996). "Walls reinforced with fiber reinforced plastic geogrids in Japan." Geosynthetics Int., 3(1), 1-11.
[38] Nellen, P.M., Frank, A., Broennimann, R., and Sennhauser, U. J. (2000). "Optical fiber Bragg gratings for tunnel surveillance." Proc. of SPIE, Smart Structures and Materials 2000: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, Newport Beach, CA, 3986, 263-270.
[39] Nkurunziza, G., Benmokrane, B., Debaiky, A.S., and Masmoudi, R. (2005). "Effect of sustained load and environment on long-term tensile properties of glass fiber-reinforced polymer reinforcing bars."  ACI Struct. J., 102(4), 615-621.
[40] Pradhan, B., Tham, L.G., Yue, Z.Q., Junaideen, S.M., and Lee, C.F. (2006). "Soil-nail pullout interaction in loose fill materials."  Int. J. Geomech., ASCE, 6(4), 238-247.
[41] Roger, H., Chen, L., and Choi, J.-H. (2002). "Effects of GFRP reinforcing rebars on shrinkage and thermal stresses in concrete." Proc., 15th ASCE Engineering Mechanics Conference, New York, NY, 1-8.
[42] Sawicki, A. (2000). Mechanics of reinforced soil. A.A. Balkema, Rotterdam, the Netherlands.
[43] Schlosser, F. (1982). "Behaviour and design of soil nailing." Proc., International Symposium on Recent Development in Ground Improvement Techniques, Bangkok, 399-413.
[44] Sen, R., Lyer, S., Issa, M., and Shahawy, M. (1991). "Fiberglass pretensioned piles for marine environment." Advanced composites materials in civil engineering structures. S. L. Iyer and R. Sen, eds., ASCE, New York, 348-359.
[45] Shiu, Y. K., and Cheung, W. M. (2003). Long-term durability of steel soil nails. GEO Rep. No. 135, Geotechnical Engineering Office, Civil Engineering and Development Dept., Government of Hong Kong Special Administrative Region, Hong Kong.
[46] Singhvi, A., and Mirmiran, A. (2002). "Creep and durability of environmentally conditioned FRP-RC beams using fiber optic sensors."  J. Reinf. Plast. Compos., 21(4), 351-373.
[47] Su, L.-J., Chan, T.C.F., Yin, J.-H., Shiu, Y.K., and Chiu, S.L. (2008). "Influence of overburden pressure on soil–nail pullout resistance in a compacted fill." J. Geotech. Geoenviron. Engrg., ASCE, 134(9), 1339-1347.
[48] Swann, L.H., Lorimer, M.J., Li, R.P.M, Chan, T.C.F., and Leung, F.W.K. (2007). "Instrumented soil nail pull-out tests in decomposed tuff and working bond study." Proc., 27th HKIE Geotechnical Division Annual Seminar, Hong Kong, 287-292.
[49] Walton, J.M., and Yeung, Y.T.C. (1986). "Fatigue performance of structural strands of pultruded composite rods." J. Inst. Mech. Engrg., London, C/286/86, 315-320.
[50] Yeung, A.T. (2005). "Slope disaster prevention in Hong Kong: Past, present and future." Proc., 2005 Geotechnical Engineering Joint Conference of the Korean Geotechnical Society and Korea Association of Professional Engineers in Geotechnical Engineering, Seoul, 2005, II-1 - II-21.
[51] Yeung, A.T., Cheng, Y.M., Tham, L.G., Au, A.S.K., So, S.T.C., and Choi, Y.K. (2007). "Field evaluation of a glass-fiber soil reinforcement system." J. Perform. Constr. Facil., ASCE, 21(1), 26-34.
[52] Yin, J.H., Su, L.J., Cheung, R.W.M., Shiu, Y.K., and Tang, C. (2009). "The influence of grouting pressure on the pullout resistance of soil nails in completely decomposed granite fill." Géotechnique, 59(2), 103-113.
[53] Yin, J.H., and Zhou, W.H. (2009). "Pullout test study on the influence of both grouting pressure and overburden pressure on the interface shear resistance of a soil nail." J. Geotech. Geoenviron. Engrg., ASCE, 135(9), 1198-1208.
[54] Zhao, Y., and Ansari, F. (2002). "Embedded fiber optic sensor for characterization of interface strains in FRP composite." Sens. Actuators, A, 100(2-3), 247-251.