A soil moisture estimation method using actively heated fiber Bragg grating sensors

没有可用的翻译。

Ding-feng Cao1, 2, Bin Shi1*, Hong-hu Zhu1*, Hilary I. Inyang3, Guang-qing Wei4, Chao-zhe Duan1

1 School of Earth Sciences and Engineering, Nanjing University, Nanjing 210023, China
2 Department of Civil and Environmental Engineering Department, Engineering College, University of Wisconsin-Madison, Madison, WI,53706, USA
3 Global Education and Infrastructure Services LLC, Charlotte, North Carolina, USA 
4 Suzhou NanZee Sensing Technology Co. Ltd, Suzhou 215123, China 

Abstract: Although many methods exist to measure soil moisture, there remains a lack of soil moisture sensor with small volume, high precision, excellent real-time performance and distributed monitoring capability. In this paper, a fiber Bragg grating (FBG)-based carbon fiber heated sensor (CFHS) that can counter deficiencies in soil moisture movement is proposed. The CFHS consists of a carbon fiber rod with a diameter of 5 mm, quasi-distributed FBG sensors on an optical fiber, a coating, two binding posts, and two electric cables. Laboratory calibration tests have been conducted to establish an empirical piece-wise relationship between the temperature characteristic value and soil moisture for sand, silt and clay. A laboratory validation test under normal gravitational condition and a centrifuge test under overweight condition have been implemented to verify the feasibility of this technique for soil moisture monitoring. The test results show that the CFHS can (i) accurately record soil moisture under normal gravitational and overweight conditions and (ii) demonstrate the evolution of capillary zones, and the generation and migration of moisture transition zones under centrifuge acceleration. During a response period of 5 minutes, the accuracy is 0.033 m3/m3 under 1g condition, and 0.047 m3/m3 under overweight condition. With the advantages of small sensor size, low disturbance to soil mass and wide adaptability in physical model tests, the proposed method can achieve distributed soil moisture measurement at different scales.

Keywords: Soil moisture, fiber Bragg grating (FBG), carbon fiber heated sensor (CFHS), fiber optic sensing

References 
Abu-Hamdeh, N.H., Reeder, R.C., 2000. Soil thermal conductivity: effects of density, moisture, salt concentration, and organic matter. Soil Science Society of America Journal, 64(4), 1285-1290. doi: 10.2136/sssaj2000.6441285x
Alwis, L., Sun, T., Grattan, K.T.V., 2013. Optical fibre-based sensor technology for humidity and moisture measurement: review of recent progress. Measurement, 46(10), 4052-4074. doi: 10.1016/j.measurement.2013.07.030
Berruti, G., Consales, M., Giordano, M., et al., 2013. Radiation hard humidity sensors for high energy physics applications using polyimide-coated fiber Bragg gratings sensors. Sensors and Actuators B: Chemical, 177, 94-102. doi: 10.1016/j.snb.2012.10.047
Cai, G., Zhang, T., Puppala, A. J., and Liu, S., 2015. Thermal characterization and prediction model of typical soils in Nanjing area of china. Engineering Geology, 191(9), 23-30. doi: 10.1016/j.enggeo.2015.03.005
Cao, D.F., Shi, B., Yan, J.F., et al., 2014. Distributed method for measuring moisture content of soils based on C-DTS. Chinese Journal of Geotechnical Engineering, 36(5), 910-915. doi:10.11779/CJGE201405015 (in Chinese)
Cao, D., Shi, B., Zhu, H., et al., 2015. A distributed measurement method for in-situ soil moisture content by using carbon-fiber heated cable. Journal of Rock Mechanics and Geotechnical Engineering, 7(6), 700-707. doi: 10.1016/j.jrmge.2015.08.003
Carslaw, H.S., Jaeger, J.C., 1959. Conduction of heat in solids. Oxford: Clarendon Press, 1959, 2nd ed.
Cho, W. J., Kwon, S., and Choi, J. W., 2009. The thermal conductivity for granite with various water contents. Engineering Geology, 107(3–4), 167-171. doi: doi.org/10.1016/j.enggeo. 2009.05.012
Ciocca, F., Lunati, I., Van de Giesen, N., et al., 2012. Heated optical fiber for distributed soil-moisture measurements: A lysimeter experiment. Vadose Zone Journal, 11(4) :1-10. doi:10.2136/vzj2011.0199
Côté, J., Konrad, J.M., 2005. A generalized thermal conductivity model for soils and construction materials. Canadian Geotechnical Journal, 42(42), 443-458. doi: 10.1139/t04-106
Erdogan, T., 1997. Fiber grating spectra. Journal of Lightwave Technology, 15(8), 1277-1294. doi: 10.1109/50.618322
Florides, G., and Kalogirou, S., 2008. First in situ determination of the thermal performance of a U-pipe borehole heat exchanger, in Cyprus. Applied Thermal Engineering, 28(2–3), 157-163. doi: 10.1016/j.applthermaleng.2007.03.026
Gangadhara, R.M., Singh, D.N., 1999. A generalized relationship to estimate thermal resistivity of soils. Canadian Geotechnical Journal, 36(4), 767-773. doi: 10.1139/t99-037
Huang, A.B., Lee, J.T., Ho, Y.T., et al., 2012. Stability monitoring of rainfall-induced deep landslides through pore pressure profile measurements. Soils and Foundations, 52, 737–747. doi: 10.1016/j.sandf.2012.07.013
Huang, X.F., Sheng, D.R., Cen, K.F., & Zhou, H., 2007. Low-cost relative humidity sensor based on thermoplastic polyimide-coated fiber Bragg grating. Sensors and Actuators B: Chemical, 127(2), 518-524. doi: 10.1016/j.snb.2007.05.007
Lu, S., Ren, T.S., Gong, Y.S. Horton, R., 2007. An improved model for predicting soil thermal conductivity from water content at room temperature, Soil Science Society of America Journal, 71, 8-14. doi: 10.2136/sssaj2006.0041
Rao, M. G., & Singh, D. N, 1999. A generalized relationship to estimate thermal resistivity of soils. Canadian Geotechnical Journal, 36(4), 767-773. doi: 10.1139/t99-037
Sayde, C., Gregory, C., Gil‐Rodriguez, M., et al., 2010. Feasibility of soil moisture monitoring with heated fiber optics. Water Resources Research 46(6), W06201-8. doi: 10.1029/2009WR007846
Sayde, C., Buelga, J.B., Rodriguez‐Sinobas, L., et al., 2015. Mapping variability of soil water content and flux across 1–1000 m scales using the actively heated fiber optic method. Water Resources Research, 50(9), 7302-7317. doi: 10.1002/2013WR014983
Sourbeer. J,J,, & Loheide, S.P., 2015. Obstacles to long-term soil moisture monitoring with heated distributed temperature sensing. Hydrological Processes, 30, 1017-1035. doi: 10.1002/hyp.10615
Striegl, A.M., Loheide, S., 2012. Heated distributed temperature sensing for field scale soil moisture monitoring. Ground Water, 50(3), 340-347. doi: 10.1111/j.1745-6584.2012.00928.x
Tarnawski, V.R. & Wagner, B. 2011. A new computerized approach to estimating the thermal properties of unfrozen soils, Canadian Geotechnical Journal, 29, 714-720.
Wu, J. H., Shi, B., Cao, D. F., et al., 2017. Model test of soil deformation response to draining-recharging conditions based on DFOS. Engineering Geology, 226 (30), 107-121, doi: 10.1016/j.enggeo.2017.04.025
Yeo, T.L., Sun, T., & Grattan, K.T.V., 2008. Fibre-optic sensor technologies for humidity and moisture measurement. Sensors and Actuators A: Physical, 144(2), 280-295. doi:10.1016/j.sna.2008.01.017
Yin, Z., Lei, T., Yan, Q., Chen, Z., & Dong, Y., 2013. A near-infrared reflectance sensor for soil surface moisture measurement. Computers and Electronics in Agriculture, 99, 101-107. doi: 10.1016/j.compag.2013.08.029
Zhu, H.H., Ho, A.N.L., Yin, J.H., et al., 2012. An optical fibre monitoring system for evaluating the performance of a soil nailed slope. Smart Structures and Systems, 9(5), 393-410.
Zhu, H.H., Shi, B., Yan, J.F., et al., 2014. Fiber Bragg grating-based performance monitoring of a slope model subjected to seepage. Smart Materials and Structures, 23, 095027.
Zhu, H.H., Shi, B., and Zhang, C.C., 2017. FBG-based monitoring of geohazards: current status and trends. Sensors, 17, 452. doi: 10.3390/s17030452
Zhu, H. H., Shi, B., Yan, J. F., et al., 2015. Investigation of the evolutionary process of a reinforced model slope using a fiber-optic monitoring network. Engineering Geology, 186, 34-43. doi: doi.org/10.1016/j.enggeo.2014.10.012